How To Clean The Dirt in The Generator Water Tank After A Long Time

Jun 13, 2025

Leave a message

After prolonged use of the generator, the water tank may become dirty, with most of the dirt being water scale. Today, we will bring you the correct treatment methods.
During the operation of the generator cooling system, there may be corresponding damage to the coolant. It is necessary to add water to the cooling system as soon as possible. Some customers do not add coolant or pure water, but actually add hard water. The results show that the calcium and magnesium ions in the hard water are very easy to form scale and dirt with the organic components in the general coolant.

If there is too much scale and dirt in the generator water tank, impurities will block the water tank and it is very easy to ignite improperly, which will cause the generator temperature to be too high and the thermal conductivity to decrease, seriously endangering the actual heat dissipation effect and thus reducing the service life of the generator.

The specific steps to completely eliminate scale and dirt in the generator water tank are as follows: prepare a cleaning agent with 30 kilograms of water, 2.5 kilograms of caustic soda, and 0.6 kilograms of kerosene, and pour it into the water tank. Turn on the generator and run it at medium speed for 10 minutes before turning off the engine.

Wait for 10 to 12 hours before restarting the generator. Run at medium speed for 10 minutes until the engine stalls and releases the cleaning agent. After adding the cleaned cooling water, start the generator and operate at a medium speed to self clean. Repeating this process 2-3 times can completely eliminate the scale and dirt.

Today we have briefly introduced to you how to clean the dirt in the generator water tank correctly. If there is anything else you need to know, please feel free to consult our company website. Next, we will introduce relevant information to you.

 

Send Inquiry