How To Deal With Loose Fan Belt Of Diesel Generator Set

Jun 11, 2025

Leave a message

Today we will briefly introduce how to deal with loose fan belts in diesel generator sets. What else do you need to know about this.
Adjustment method for generator fan belt: Gently press or pull the belt with a force of 30-50 Newton in the middle of the drive belt. If the belt is 15-20 millimeters different from the original part, the tightness of the drive belt should be considered normal. Otherwise, adjustment should be made. Its method can be divided into different structures: it is equipped with a tensioning wheel structure. Loosen the fixing nut, turn the adjusting screw, and move the tensioning wheel up and down to achieve the desired tightness; The fan and generator are driven by the same drive belt, and the generator support frame can be moved to change the pulley position to achieve the desired tightness; The pulley is composed of two halves. First, loosen the fixing bolt, and then rotate the adjustable half of the pulley to change the width of the synthesized pulley. Then, lift and lower the triangular belt to achieve the desired tightness.

 

Knowing how to handle it also requires understanding the reasons. The fundamental reason for the looseness of the fan belt in diesel generator sets is that it may be caused by aging, incorrect model specifications, and offset of the belt pulley spacing. Aging is the most common of these three factors. If the fan belt of the diesel generator set becomes loose, the exhaust air volume will be greatly affected, and the supply and demand balance of the cooling exhaust air volume of the diesel generator set will naturally be insufficient, which will lead to an increase in the overall mechanical temperature and cause a lot of damage.

 

The belt will age and crack after running for a period of time, becoming loose and producing an abnormal "squeaking" sound at this moment. Try to conduct inspections during the process of abnormal noise. If it doesn't crack, just adjust the tightness. If it cracks, the belt and tensioner must be replaced. Tightening the belt after it cracks can cause the belt to rupture. After the belt breaks, the diesel engine cannot operate normally.

 

Send Inquiry