What Is The Operation Of Preheating And Starting A Diesel Generator Set?

Jun 21, 2025

Leave a message

1. Preheating
Before starting a unit equipped with a preheater, personnel can decide whether to preheat the unit based on the ambient temperature. The control screen with a preheating button can control the engine to start heating and achieve the purpose of preheating.

 

2. Power on
Turn the key switch of the control screen from OFF to ON position, and observe that the instrument background light on the panel is on, indicating that the control screen has been powered on, and the fuel of the unit is in the on state. The controller with electronic speed control or electronic fuel injection type unit is also in working state.

 

3. Start up
Some unit control screens have idle/full speed conversion switches, and users can choose whether to start at idle or at full speed at once according to their actual needs. Normally, the idle running time should not exceed 5 minutes, and the unit should not run at idle for a long time
Press the start button for a maximum duration of 30 seconds, and the engine will start under the drive of the starter motor. Once the start is successful, release the start button and the unit will enter the running state.
Suggestion: To extend the service life of the starting battery and starting motor, it is advisable to control the starting time of the unit within 5-10 seconds. If the first startup is unsuccessful, pause for a corresponding amount of time before starting the program again.

 

Send Inquiry