The reason for the insufficient output power of the generator set is that the components of the generator set are integrated with strict limit switches. The original factory has undergone adjustment and testing to achieve the best fuel consumption of the diesel engine. After maintenance, the output power situation may cause the following problems: unclear air filter; Blockage of exhaust pipe; The provided oil has a too large or too small advance angle; Piston rod and cylinder liner contusions; The software of the gasoline and diesel system has common faults, and the refrigeration and intake systems have common faults; Common faults of cylinder head group; The crankshaft piston pin and crankshaft connecting rod motor shaft surface are bitten.
If the output power of the generator set is insufficient due to common faults mentioned above, the air filter can be used without cleaning. The generator set manufacturer should clean the diesel engine air filter core or eliminate the dust on the paper filter core according to regulations, and replace the filter core if necessary. Cleaning method for exhaust pipe blockage: It should be checked whether the increase in exhaust pipe guide friction resistance is caused by excessive carbon accumulation inside the exhaust pipe.
The back pressure type of general exhaust pipe is not suitable for exceeding 3.3Kpa, and carbon deposits in the exhaust pipe should be regularly cleaned. Cleaning method for excessive or insufficient oil advance angle provided by the generator set: The generator set manufacturer should check whether the screw of the tight connector of the oil pump rotating shaft is loose. If it is loose, the oil advance angle provided should be adjusted again according to the regulations and the screw should be tightened.

